Only one-third start-up time of conventional soldering irons with ceramic heaters1
Can be used to solder places on multi-layer boards where heat loss it great.
Excellent conduction of heat from the heater increases heating efficiency, shortens strap-up time, and minimizes temperature fluctuations during soldering.
Faster sensor response makes the supply of heat uniform and enables more accurate control over tip temperature.
High quality, uniform soldering is possible even with fine soldering iron tips.
Compact unit takes up little space on the work-bench.
Thinner grip for easier use.
Lock screw prevents inadvertent changes in the temperature setting.
The unit is also available in regular style other than ESD safe.
Digital indicator ensures accurate temperature setting by all personnel.
Once set, temperature cannot be changed with out inserting the control card, providing easy temperature management.
Compact unit takes up little space on the work bench.
ESD Safe by design.
Two soldering irons of different thermal capacities may be used simultaneously.
Choose the exact irons you need for your soldering applications.
Cost effective and practical in production, using up less available space.
Super quick heat-up and faster thermal recovery, permitting high quality soldering at lower temperature.
Two separate controls, independent of each other.

Simple and quick temperature setting by inserting the appropriate temperature button into the handle.
Easy temperature management-preset temperature can be seen at a glance.
More efficient use f work space.
Begin soldering in only 10 Seconds
Greater thermal capacity and rapid transmission to the tip means faster thermal recovery.
The temperature control sensor is built into the heating element for faster, more stable temperature control.
The highly insulated ceramic heater never over heats.
An insulation factor of over 100M can be maintained even during actual use.
The compact, light weight design with high cooling efficiency at the handle permits fatigue-free soldering over long periods for maximum work efficiency.
Compact, light weight design with a slender handle for a more comfortable grip.
Rod-type ceramic heater brings high insulation, and reduces the handle-to-tip distance for faster soldering with a minimum of movement.
Special alloy heating element is printed in the alumina ceramic insulating layer and then sintered to the ceramic main body, thus completely sealing the heating element off from air. This protects the heating element from oxidation, and ensures years of trouble – free use.
Both the HAKKO 455,456 incorporates a ceramic heating element, which provides a longer service life than conventional nichrome heating element.
Alloy – coated iron tips ensure long lasting protection from corrosion.
The HAKKO 455 is perfect fro soldering tuners, inverters and similar components.
The HAKKO 456 is ideal for soldering chassis, dynamos, large harnesses, transformers and other parts which require a large amount of soldering

Adopts advanced stainless steel for its melting pot and holder- tray, prologs the life of the device. With precise system of controlling temperature.
With large range of temperature adjustment, be suitable for melting solder, rosin, plastic, etc.
Easy replacement of each accessory like heater, solder pot, sensor and heat insulation board.
1) Use of internal heating ensures the heating tube working without air oxidation,
thus to lengthen the service life of heating element
2) PID intelligent control and precious metal sensor to timely show the temperature
in the furnace, thus to actuate precise temperature control
3) Use of high quality stainless steel tin pot to feature high temperature resistance,
quick temperature rise, long service life, economy of electric power and easy
operation
Technical parameters:
1) Type: ZB-38D, ZB-50D, ZB-80D, ZB-100D
2) Range of temperature control: normal temperature 200-450
3) Dimensions of tin trough: 38mm, 50mm, 80mm, 100mm
4) Weight of tin: 38mm 0. 3kg, 50mm 0. 5kg, 80mm 1. 6kg, 100mm 2. 3kg
5) Power: 150W, 200W, 250W, 380W
6) Power supply: AC 220V 10% 50Hz
7)time for Melt down tin: 3-8 Minute