ESD safe chair is essentially designed for discharging the accumulated electrical
charges for the operator during critical electronic assembly, • Height adjustable.
• Revolving.
• Colour : Blue • With Antistatic Cushioned Seat & Back.
• A additional attachment of a brass chain clamped on the bottom of the chair for additional grounding purpose is also provided. • Clean room compatible.
• Pneumatically Operated.,
• Conductive Castor Wheels
• Meets the ANSI ESD S2010.2007 and EIA 625 Standards Antistatic Chair : Surface Resistivity of seat & back to the Ground 10^10 - 10¹º Ohms / Sq.
ESD safe chair is essentially designed for discharging the accumulated electrical charges for the operator during critical electronic assembly.
Special Features :
• Height adjustable.
• With Arms
• Revolving.
• With Antistatic Cushioned Seat & Back.
• Antistatic Vinyl base material used for seat & back with FR properties.
• Conductive castor wheels
• A additional attachment of a brass chain clamped on the bottom of the chair for additional grounding purpose is also provided.
• Clean room compatible. • Pneumatically Operated.
• Chrome base for foot resting.
• Meets the ANSI ESD S2010.2007 and EIA 625 Standards.
• Base Dimension : 26” • Foam Thickness : 2”
Antistatic Chair : Surface Resistivity of seat & back to the Ground 10^10 - 10¹º Ohms
ESD safe chair is essentially designed for discharging the accumulated electrical charges for the operator during critical electronic assembly.
Special Features :
• Height adjustable.
• With Arms & With Crome Base
• Revolving.• With Antistatic Cushioned Seat & Back.
• Antistatic Vinyl base material used for seat & back with FR properties.
• Conductive castor wheels
• A additional attachment of a brass chain clamped on the bottom of the chair for additional grounding purpose is also provided.
• Clean room compatible. • Pneumatically Operated.
• Chrome base for foot resting.
• Meets the ANSI ESD S2010.2007 and EIA 625 Standards.
• Base Dimension : 26” • Foam Thickness : 2”
Antistatic Chair : Surface Resistivity of seat & back to the Ground 10^10 - 10¹º Ohms
Material : Homogeneous Antistatic composition
with black Conductive layer
sandwiched between
Two antistatic layers.
2. Thickness : 2 mm ± 0.1mm
3. Sound Reduction factor : 3 db for 2 mm thickness
4. Inflammability : Self-extinguishing.
5. Water absorption : At room temperature for 24 hours is
Less than 0.1%
6. Colour : Blue / Grey
Material : Conductive Plastic
Total Size : 450 mm x 130 mm (Approximately)
Colour : Black
No of PCBs : 25 Nos
Surface Resistance : 10^4 to 10^6 Ohms / Sq
Surface Resistance : 10^4 TO 10^6
Over All Size : 355 x 320 x 563 mm
Max. Storage : 50 PCB
Suitable PCB Size : 350 X ( 50 – 250) mm
Side Guide Slot : Depth 3.5 mm, Width – 5 mm , Pitch – 10 mm
The Top & Bottom Boards are made of plastic / metal gear track type easy to operation
Table mat to Floor Ground Cord : Length : 2 mtrs
Wire Dia : 3 mm
Conductor : 18 strands annealed bar copper of 0.1 mm dia
Connectors : Molded cup type with female button on both ends.
Includes mat, Wristband Set, Straight ground cord 1Mg. Crocodile clip.
Static Shielding Bags & Anti Static brush
Two Pockets, Provide ESD protection of PCBs.
Two Studs With Reinforced backing
Resistance : 10^3 to 10^5 Ohms / Sq
Resistance to Ground : 10^3 to 10^7
Colour : Black
Imported PVC Tiles
The damage of electrostatic discharge is much serious and many of the incidents including damage to super integrated circuits in semi-conductor production lines and loss of valuable data from malfunction of computer as well as inadvertent ignition of inflammable and explosions and contagions in hospital and post operation have been proven to be the results of electrostatic discahrge.
The cause of electrostatic discharge damage is that when two objects with electrostatic charge come into contact or friction causing electron movement occur with electrification to positive and negative poles, which are stationary at the points of mutual contact. A direct action against these points causes instant electric discharge resulting in damage to products or pollution or malfunction by sticking to the surface of charged body of opposite polarity. In order to prevent the damaged caused by electrostatic discharge, both UL and NFPA strongly recommend the use of conductive floor. ESD Work Vinyl tile is a high tech material that satisfies their specification requirements completely and is necessary in the environment of up-to-date industries and living. Technical Specification of PVC Imported Tile
Size : 600 mm x 600 mm
Thickness : 2 MM
Colour : White Granite finish
Surface Resistivity : 10^6 to 10^8 ohms / Sq ,
Volume Resistivity : 10^6 to 10^8 ohms / Sq
Rate of Decay : < 0.02 Seconds,
Hardness : < 85 shore ‘D’
Static Generation : < 100 Volts ,
Flammability : Self Extinguishing
We offer fixed PCB carriers L type by ALKON. It is a two side support PCB carrier of conductive or non conductive material and used for stronger card holding. Conductive fixed PCB carriers L type are considered excellent carriers for work benches. These fixed PCB carriers L type are easy to handle and does not occupy much space. The electrically conductive model is earthed only by placing on an earthed table. Our L type PCB carriers have following features:
Holds up to 25 PCB’s
• Conductive polypropylene, • Small rack 2mm between 2 slots
• Large rack 3mm between 2 slots, • Surface resistance 10^4–10^6 Ohm
